How to Make LARP Arrows: Step-by-Step Guide

Making your own LARP (Live Action Role-Playing) arrows can be fun and rewarding. It’s important to make sure they are safe to use in games. Follow these easy steps to create your own LARP arrows.

Materials Needed:

  1. Arrow Shafts: Fiberglass or carbon fiber shafts work best because they are strong and flexible.
  2. Arrow Nocks: Plastic nocks that fit the end of the shaft.
  3. Fletchings: Soft, flexible plastic or foam vanes.
  4. Foam Heads: Closed-cell foam for the arrowhead.
  5. Tape: Duct tape or gaffer tape.
  6. Adhesive: Hot glue or strong adhesive.
  7. Fabric: Soft fabric to cover the foam head.

Tools Needed:

  1. Utility Knife: For cutting foam and tape.
  2. Hot Glue Gun: For attaching parts.
  3. Scissors: For cutting tape and fabric.
  4. Measuring Tape: To measure and cut the shafts.

Step-by-Step Instructions to Make LARP Arrows:

1. Prepare the Arrow Shaft:

First, measure and cut the arrow shafts to your desired length, usually between 28-32 inches. After cutting the shafts, glue the plastic nocks to one end of each shaft. This will be the back end of the arrow.

2. Attach the Fletchings:

Next, cut the fletchings if they aren’t pre-cut. The vanes should be about 4-5 inches long. Then, use hot glue or strong adhesive to attach the fletchings to the shaft, spacing them evenly around it. This helps the arrow fly straight.

3. Create the Foam Heads:

To create the foam heads, cut a cylinder of closed-cell foam about 2-3 inches wide and 2-3 inches long. Round the edges of the foam to ensure there are no sharp corners. Use hot glue to attach the foam head securely to the other end of the arrow shaft, making sure it is centered and firmly attached.

4. Cover the Foam Head:

Cut a piece of soft fabric large enough to cover the foam head with some extra fabric to spare. Wrap the fabric around the foam head and secure it with duct tape or gaffer tape. Ensure the fabric is tight and smooth to avoid any wrinkles that could affect the arrow’s performance.

5. Safety Check:

Finally, inspect each arrow to make sure it is stable and safe. The foam heads should be securely attached, and the fabric should not be too tight, which could compress the foam too much. Test the arrows by shooting them at a soft target to ensure they don’t cause any damage or harm.

Safety Tips:

Always use materials that are safe and non-toxic. Follow the safety rules of your LARP group or organization. Regularly check your arrows for wear and tear, and replace any damaged parts immediately.


Creating your own LARP arrows can be a fun and fulfilling project that adds a personal touch to your role-playing experience. By carefully following the steps and safety tips outlined in this guide, you can ensure that your arrows are both effective and safe for use in games. Remember to regularly inspect and maintain your arrows to keep them in top condition. Enjoy the process of crafting and the excitement of using your handmade arrows in your next LARP adventure! If you prefer melee, check out our guides on how to make a larp sword and how to make a larp shield.